PCI Express x8 (Dual Port) 2xSFP+ 10 Gigabit Server Adapter

 

Intel 82599ES Based

PCI Express x8 (Dual Port) 2xSFP+ 10 Gigabit Server Adapter
(Intel 82599ES Based)

Special Offerslogo-DimiksShop-clean0

PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter (Intel 82599ES Based) PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter (Intel 82599ES Based)

Description:
PCI Express x8 (Dual Port) 2xSFP+ 10 Gigabit Server Adapter: 
pdf button

Server Network Card (Intel 82599ES Based) DOES NOT REQUIRE  SFP+ compatible with Intel.
You can use any SFP+ transceivers (do not need to reprogram the SFP+ for Intel).

9802BF-2SFP+10G Server Adapters with SFP+ connectivity are the most flexible and scalable Ethernet adapt- ers for today’s demanding data center environments. Data center networks are being pushed to their limits. The escalating deployments of servers with multi-core processors and demanding applications such as High Performance Computing (HPC), database clusters, and video-on-demand are driving the need for 10 Gigabit connections. Customers require flexible and scalable I/O solutions to meet the rigorous requirements of running mission-critical applications in virtualized and unified storage environments.

All Description PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter :

 Best Choice for Virtualization

The explosive growth in virtualization is leading to an increasing demand for network performance. With more Virtual Machines (VMs) running on each multi-core server, networking traffic is dramatically increased with each VM competing for available I/O bandwidth. Intel’s family of  9802BF-2SFP+ 10G Server Adapters addresses networking bottlenecks in virtualized environments. These adapters enable network-intensive applications to achieve the performance expected in a virtualized environment.

The  10G LREC9802BF-2SFP+server adapter provides the best networking performance available in the industry, whether the physical port is configured in an emulation mode using the virtual switch in the Virtual Machine Monitor (VMM), or is directly assigned to a virtual machine. In the emulation mode, Intel’s I/O technology, Virtual Machine Device queues1  (VMDq) optimizes network performance by offloading data sorting and copying from the software Virtual Switch in the VMM to the Intel Ethernet 82599 10 Gigabit Controller. This configuration is best suited for a large number of VMs running standard applica- tions that have limited bandwidth and latency requirements.

For mission-critical applications, where dedicated I/O is required for maximum network performance, users can assign a dedicated virtual adapter port to a VM. Using the PCI-SIG SR-IOV capability on an  9802BF-2SFP+ 10G server adapter provides direct VM connectivity and data protection across VMs. SR-IOV technology allows the data to bypass the software virtual switch and provides near-native performance. It assigns either physical or virtual I/O ports to individual VMs directly. This technology is best suited for applications that demand the highest I/O throughput and lowest latency performance such as database, storage, financial and other applications.

PCI-SIG SR-IOV is a mechanism for devices to advertise their ability to be directly assigned to multiple virtual machines. SR-IOV allows for the partitioning of a PCI function into many virtual interfaces for the purpose of sharing the resources of a PCI Express* (PCIe) device in a virtual environment. These virtual interfaces are called Virtual Functions. Each virtual function

can support a unique and separate data path for I/O-related functions within the PCI Express hierarchy. Use of SR-IOV with a networking device, for example, allows the bandwidth of a single port (function) to be partitioned into smaller slices that may be allocated to specific VMs, or guests, via a standard interface.

The  9802BF-2SFP+ 10G server adapter delivers the same functionality and throughput as ten dual-port, one gigabit adapters, saving cost, power, and complexity. 

Unified Networking and Storage

The family of  9802BF-2SFP+ 10G server adapters lowers your data center total cost of ownership (TCO) by providing the ability to route LAN and SAN traffic over a single fabric.

Support for Fiber Channel over Ethernet (FCoE)

FCoE encapsulates Fiber Channel frames over standard Ethernet networks, enabling Fiber Channel to take advantage of 10 GbE networks while preserving its native protocol. The  LREC9802BF-2SFP+10G server adapter offer FCoE hardware acceleration to provide performance comparable to FC HBAs. The server adapters support Data Center Bridging, also known as Converged Enhanced Ethernet (CEE), which allows customers to configure traffic classes and priorities to deliver a lossless Ethernet fabric. An Intel Ethernet X520 server adapter reduces TCO by eliminating redundant fabrics and saves the cost of expensive FC HBAs and FC switch ports.

Support for iSCSI

The server adapters provide complete support for proven native OS and VMM iSCSI initiators as well as iSCSI boot. Historically, CRC32C computation has degraded system performance, but now with the CRC instruction set included in the latest Intel® Xeon® processors, CRC validation is possible with minimal impact to network throughput while delivering superior data integrity.

The  9802BF-2SFP+ server adapters do it all 10 Gigabit LAN, FCoE, and iSCSI; truly delivering on the promise of unified networking.

Reliable Performance

The family of  9802BF-2SFP+ 10G server adapters include a number of advanced features that allow it to provide industry-leading performance and reliability.

Security Optimizations

The adapters support IPsec offload for Microsoft’s Network Access Protection (NAP), Active Directory,* and future security capabilities in Windows* 7. An  10G server adapter allows customers to run a secure network environment without sacrificing performance.

PCIe v2.0 (5 GT/s)

PCIe v2.0(5GT/s) support enables customers to take full advan- tage of 10 GbE by providing a maximum of 20Gbps bi-directional throughput per port on a single dual port card.

Designed For Multi-core Processors

Support for technologies such as multiple queues, receive-side scaling, multiple MSI-X vectors, and Low Latency Interrupts allow the  LREC9802BF-2SFP+10G server adapter to provide high-performance, 10 Gigabit connectivity in multi-core server blades. These technolo- gies distribute network processing across multiple CPU cores, improving overall performance.

Features:
PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter

General

  • Intel® 82599 10 Gigabit Ethernet Controller
  • SFP+ Connectivity
  • Low-profile
  • Load balancing on multiple CPUs
  • iSCSI remote boot support
  • Fibre Channel over Ethernet (FCoE) Support
  • Support for most network operating systems (NOS)
  • RoHS-compliant2
  • Intel® PROSet Utility for Windows* Device Manager
  • Time Sync (IEEE 1588, 802.1as)

All features PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter :

General

Intel® 82599 10 Gigabit Ethernet Controller
SFP+ Connectivity
Low-profile
Load balancing on multiple CPUs
iSCSI remote boot support
Fibre Channel over Ethernet (FCoE) Support
Support for most network operating systems (NOS)
RoHS-compliant2
Intel® PROSet Utility for Windows* Device Manager
Time Sync (IEEE 1588, 802.1as)

I/O Features for Multi-core Processor Servers

Intel® Direct Cache Access (DCA)
MSI-X support
Low Latency Interrupts
Header Splits and Replication in Receive
Multiple Queues: 128 Tx and Rx queues per port
Tx/Rx IP, SCTP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities
Tx TCP segmentation offload (IPv4, IPv6)
Receive and Transmit Side Scaling for Windows environment and Scalable I/O for Linux* environments (IPv4, IPv6, TCP/UDP)
IPsec Offload
MacSec

Virtualization Features

VMDq
Next-Generation VMDq1  (64 queues per port)
PC-SIG SR-IOV Implementation (64 virtual functions per port)
Virtual Machine Load Balancing (VLMB)
Advanced Packet Filtering
VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags

Manageability Features

Preboot eXecution Environment (PXE) Support
Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) Statistic Counters
iSCSI Boot
Watchdog Timer

Adapter Product Features

Intel® PROSet Utility
Plug and play specification support
Receive Side Scaling
Direct Cache Access (DCA)

Advanced Software Feature

Adapter fault tolerance (AFT)
Switch fault tolerance (SFT)
Adaptive load balancing (ALB)
Teaming support
IEEE 802.3ad (link aggregation control protocol)
PCIe Hot Plug*/Active periphera; component interconnect (PCI)
IEEE 802.1Q* VLANs
IEEE 802.3 2005* flow control support
Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol(TCP), user datagram protocol
(UDP), Internet protocol (IP)
IEEE 802.1p*
TCP segmentation large send offload
MSI-X supports Multiple Independent Queues
Interrupt moderation
IPv6 offloading — Checksum and segmentation capability extendedto new standard packet type

Network Operating Systems (NOS) Software Support

Windows 7 32-bit(64-bit)
Windows 8 32-bit(64-bit)
Windows 8.1 32-bit(64-bit)
Windows Vista 32-bit(64-bit)
Windows Server 2003 32-bit(64-bit)
Windows Server 2008 32-bit(64-bit)
Windows Server 2008 R2 32-bit(64-bit)
Windows Server 2012 32-bit(64-bit)
Windows Server 2012 R2 32-bit(64-bit)
Linux kernel 2.6.30 or greater (x86_64) (w/ SR-IOV support)
FreeBSD 7.2 or laster
Linux RHEL 5.6
Linux RHEL 6.x
Linux SLES 11 SP1
Linux SLES 10 SP4
OS Independent
DOS NDIS 2
DOS ODI
EFI 1.1
UEFI 2.1
Vmware ESX 4.02
Vmware ESX 4.02
VMware Workstation

 

Broadcom BCM57810S Based

PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter
(Broadcom BCM57810S Based)

Special Offerslogo-DimiksShop-clean0

PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter (BCM57810S Based)

Description:
PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter: 
pdf button

The 9812AF-2SFP+ is a dual-port 10Gb Ethernet adapter featuring the next generation BCM57810S single-chip solution from Broadcom in a PCIe 2.0 compliant form factor. Leveraging Broadcom's market-proven architecture and software, the 9812AF-2SFP+ delivers full line-rate performance across all ports with low power consumption. The 9812AF-2SFP+ supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing,MSI-X, NIC teaming(bonding),Receive Side Scaling (RSS), jumbo frames, PXE boot and virtualization features such as VMware NetQueue and Microsoft VMQ.

All Description PCI Express x8 Dual Port SFP+ 10 Gigabit Server Adapter :

Product Features

Industry-leading throughput and latency performance
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE) Improved small packet performance
Low profile design shipping with standard height and low-profile brackets SR-IOV capable in hardware (requires server FW, SW and OS support) Active Health Systems support via FW (OCBB), I2C capable
PXE, Jumbo Frames, Checksum & Segmentation  Offload, IPv6 and RSS On chip temperature monitor (OCSD)
Standard server operating system support
Standard NC series option kit warranty, support, services
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE) Integrated PHY and MAC
IEEE 1588 (Time Synchronization) Support for SR-IOV (Windows)

Dual-port 10 Gigabit Ethernet Throughput

The 9812AF-2SFP+ adapter delivers 20Gbps full duplex Ethernet transfer rate per port (40 Gbps per adapter), providing the network performance needed to improve response times and alleviate bottlenecks that impact performance of next generation data centers.10Gb Ethernet bandwidth is ideal for high performance computing, database clusters, and more.

Jumbo Frames

The 9812AF-2SFP+ adapter supports jumbo frames (also known as extended frames), permitting up to a 9K byte (KB) transmission unit (MTU) when running Ethernet I/O traffic.This is over 5X the size of a standard 1500-byte Ethernet frame.With jumbo frames,networks can achieve higher throughput performance and greater CPU utilization.These attributes are particularly useful for database transfer and tape backup operations.

TCP/IP Stateless Offloading

TCP,IP,UDP checksum offload,Large Send Offload (LSO),TCP,Segmentation Offload (TSO). These features optimize host efficiency, leaving the CPU available for other duties.
The 9812AF-2SFP+ Adapter by Broadcom offers TCP/IP stateless offloading capability.

MSI and MSI-X

Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs/cores.The 9812AF-2SFP+ Adapter by Broadcom supports MSI and MSI-X.

802.1Q VLANs

IEEE802.1Q virtual local area network (VLAN) protocol allows each physical port of the 9812AF-2SFP+ adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance.VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance.The 9812AF-2SFP+ Adapter provides support for 802.1Q (VLAN).

Standard Features

TOE

TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to the adapter's processor, freeing server CPU cycles for other operations.

Single-Root I/O Virtualization

Single-Root I/O Virtualization (SR-IOV) provides a mechanism tobypassthehostsystemhypervisorin virtual environment sprovidingnearmetal performance and server efficiency. SR-IOV provides mechanism to create multiple Virtual Functions (VFs) to share single PCIe resources. The device is capable of SR-IOV, and requires Server BIOS support, controller firmware, and OS support.

Optimized for Virtualization

I/O Virtualization support for VMware Net Queue and Microsoft VMQ help meet the performance demands of consolidated virtual work loads.

Checksum & Segmentation Offload

Normally the TCP Checksum is computed by the protocol stack. By selecting one of the "Checksum Offload" parameters, the checksum can be computed by the adapter.
Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead. The technique is also called TCP segmentation offload (TSO) when applied to TCP, or generic segmentation offload (GSO).
The 9812AF-2SFP+ Adapter by Broadcom has Checksum and Segmentation Offload capabilities

IPv6

IPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing.The 9812AF-2SFP+ Adapter by Broadcom supports IPv6

Receive Side Scaling (RSS)

RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors. RSS enables packet receive-processing to scale with the number of available processors.The 9812AF-2SFP+ Adapter by Broadcom has RSS capabilities.

Time synchronization implementations (PTP)

Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems.The 9812AF-2SFP+ Adapter by Broadcom supports Precision Time Protocol-ready (PTP).

Network Adapter Teaming

The 9812AF-2SFP+ adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, The team of adapters can work together as a single virtual adapter. The 9812AF-2SFP+ provides support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs.

Network Management

Management Support

The 9812AF-2SFP+ adapter can be administered from Insight Manager (SIM). The adapters can be managed individually or in teams, providing SNMP based statistics for reporting purposes. The 9812AF-2SFP+ adapter can also be managed by other applications with SNMP support.

Standard Features

Server Integration

The 9812AF-2SFP+ adapter is a validated, tested, and qualified solution.
This approach provides a more robust and reliable networking solution than offerings from other venders and provides users with a single point of contact for both their servers and their network adapters.

Configuration Utilities

Each 9812AF-2SFP+ ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations.

LED Indicators

The colored LEDs on each port of the 9812AF-2SFP+ adapter indicate link status and link activity.

Preboot eXecution Environment (PXE)

PXE allows the server to boot over the network and download software residing in the network.

VMware NetQueue and Microsoft Virtual Machine Queue (VMQ)

VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network adapters in virtualized environments.
Windows Hyper-V VMQ (VMQ) is a feature available on servers running Windows Server 2008 R2 with VMQ-enabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an external virtual machine network directly to virtual machines, which reduces the overhead of routing packets and copying them from the management operating system to the virtual machine.
The 9812AF-2SFP+ Adapter by Broadcom support VMware NetQueue and Windows
Hyper-V VMQ.

Technical Specifications

Network Processor
Data Rate
Broadcom BCM57810S chipset
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth.
Onboard Memory 256MB
Bus Type PCI-e 2.0 x8
Form Factor Standard and low profile adapter compliant with the PCIe standard
IEEE Compliance 802.3, 802.3ae, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg, 802.1ax
OperatingTemperature 32° to 131° F (0° to 55° C)
Humidity 5% to 95% non-condensing
Power 9W maximum
Operating System Support Microsoft Windows Server 2008, Server 2008R2, and HPC Server 2008, 32 and 64-bit
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux 5.7 and 6.1
SLES 10 and 11
VMware 4.1u2 and 5.0u1
Solaris 10

Mediaconverter-sfp-plus-10g-copper-160Converter 10G:
SFP+  -->>  10G RJ45

Programmer transceivers GBIC, SFP, SFP+

Package contents:
Programmer GBIC, SFP, SFP+  -  1pc.
The optical transceiver with which the programmer is tested before shipping to the buyer -  1pc.
Software.

Programmer GBIC, SFP, SFP+read more ...

Firmware modules


GBIC optical transceivers
GBIC optical transceiversGBIC transceivers
(reprogrammable)
1G GBIC: WDM, Duplex, Copper, CWDM

SFP optical transceivers
(reprogrammable)

SFP WDM optical transceiversSFP Duplex optical transceiversSFP Copper transceiverSFP CWDM optical transceiversSFP SFF optical transceivers
WDM, Duplex, Copper, CWDM, SFF 2x5

SFP+ optical transceivers
SFP+ optical transceiversWDM SFP+ optical transceivers
(reprogrammable)
10G SFP+: WDM, Duplex, CWDM

XFP optical transceivers
XFP optical transceiversWDM XFP optical transceivers
(reprogrammable)
10G XFP: WDM, Duplex, CWDM

blankbitcoinwesternmastercardvisapaypalbankblankblank

   Copyright © 2017 Dimiks.com. All Rights Reserved.